STEEL WELDED FLANGE
WORKING PRESSURE - 2,5 MPA
CONNECTION TYPE - 01 (PLUG-IN)
MATERIAL - CARBON STEEL
| NAME | NOMINAL DIAMETER (DU) |
| STEEL FLANGE DN40, PN25 | 40 |
| STEEL FLANGE DN50, PN25 | 50 |
| STEEL FLANGE DN65, PN25 | 65 |
| STEEL FLANGE DN80, PN25 | 80 |
| STEEL FLANGE DN100, PN25 | 100 |
| STEEL FLANGE DN150, PN25 | 150 |
| STEEL FLANGE DN200, PN25 | 200 |
| STEEL FLANGE DN250, PN25 | 250 |
| STEEL FLANGE DN300, PN25 | 300 |
| STEEL FLANGE DN400, PN25 | 400 |
| STEEL FLANGE DN500, PN25 | 500 |
| STEEL FLANGE DN600, PN25 | 600 |
SCOPE OF APPLICATION - WATER, STEAM, GAS, NON-AGGRESSIVE MEDIA
Welded steel flanges are used to connect shut-off and water fittings, pipeline elements in water and gas pipeline networks. Welded flanges are also used when installing underground hydrants using a hydrant stand to the water supply.
Welded steel flat flange is an element of pipeline fittings that provides a reliable detachable connection of pipes, fittings or equipment with a diameter of 40 mm to 600 mm at a pressure of up to 10 bar (1.0 MPa). Made of carbon steel in accordance with GOST or DIN standards.
Advantages:
Reliable and tight connection
Resistance to temperature and pressure changes
Easy installation and dismantling
Compatibility with large diameter pipelines
Areas of application:
Water supply and heating
Heating networks
Oil and gas, chemical and food industries
Installation of pumping, boiler and other equipment
The product is connected using studs or bolts.
When installing between flanges, it is necessary to use sealing gaskets.
You can buy or order flanges by contacting our managers with contacts on the website.
You can also order non-standard or large diameter flanges from us.
| Product characteristics | |
| Material | Steel |
| Diameter | 40 - 600 мм |
| Pressure | 2,5 мПа |
| Connection type | Flat |